+92 325 5222269 sales@matafindustries.com Sialkot-made, delivered worldwide

Mataf Industries Get a quote
Custom wrestling singlets cut and sewn by Mataf Industries in Sialkot, Pakistan

Mat-Ready Custom Wrestling Singlets

Four-way stretch singlets, two-piece compression kits and fight shorts, patterned to stay exactly where they belong during a match.

Get your quote Browse our wrestling singlets
Order minimum
None
Sample turnaround
10 days
Production time
1525 days
Player names & numbers
No extra charge

No garment we make leaves less room for error than a custom wrestling singlet. It is skin-tight, it stretches in all directions at the same moment, and any part that shifts during a match costs the wrestler position. It must also remain legal, and the rules governing how a singlet can look are tighter than most people realize.

Wrestling singlets from our floor

Each item here is cut, sewn and decorated in our factory, then finished with your team's own labels.

Competition singlets and two-piece wear

Compression and practice wear

Warm-up jackets and pants

Coach polos, socks and bags

Four-way stretch that recovers

Our singlets are 220 to 240gsm poly-spandex with high recovery. Recovery matters more than stretch: fabric that stretches without returning shifts on the mat, and once the shoulder has bagged out it never sits correctly again.

All seams are flatlocked. A raised seam inside a singlet becomes a pressure point under body weight, and an overlocked seam in this garment chafes the skin.

We cut leg openings high and finish them with a silicone gripper instead of elastic, so they hold without squeezing. Shoulder straps are wide enough not to dig in and set far enough in not to slip off.

Graphics are sublimated into the fiber. Anything pressed onto a four-way stretch fabric cracks at the shoulder in its first season, because the base fabric moves further than the applied layer can follow.

Built this way: sublimated competition singlets with silicone leg grippers and below-the-knee compression spats for practice.

What NFHS allows

NFHS allows either a one-piece singlet or a two-piece uniform made up of a compression shirt and fitted shorts. Whichever is used must be school-issued and consistent across the team. Manufacturer logo size and placement are restricted, as is what can appear on the garment, and NCAA rules differ. Tell us your code at the brief stage, because finding out at a meet that a singlet is illegal is a costly surprise.

Made to spec: the compression shirt that tops the two-piece and hook-and-loop fight shorts to finish the set.

Fitting every weight class

Because a wrestling roster is organized by weight class, one team covers a wider spread of body shapes than any other sport we make. Youth, junior and senior are graded separately, and we strongly advise ordering a full size set with the sample so every weight class can be checked before the bulk breakdown is set. Full graded charts with a measuring guide

The wrestling programs we supply

We make singlets for high school programs replacing uniforms on a rotation, youth and club organizations covering many weight classes, college programs, and tournament organizers who need matched sets.

Often ordered: raglan full-zip warm-up jackets in team colors.

Decoration options for wrestling singlets

Singlets stretch every way at once and the artwork must move with the fabric. A pressed-on graphic will split across the shoulders.

Dye sublimation

Dye sublimation

Ink is dyed into the fiber instead of sitting on top, so the print adds no weight and cannot peel or crack. Any number of colors, edge to edge.

Fabric must be 80%+ polyester

Cut-and-sew panelling

Cut-and-sew panelling

Color blocks are cut into the pattern itself rather than printed on a blank, so every seam lines up with the design.

No limit on panels

DTF & heat transfer

DTF & heat transfer

Fine photographic detail on cotton and blended fabrics. No screens to set up, so short runs stay affordable.

Works from one piece

Six decoration methods run in our own factory. Compare each method before choosing.

All orders pass through the same six stages: brief, pattern and sample, your sign-off, bulk cut and sew, inspection, and shipping. Bulk cutting waits until you have held the sample and approved it, and that approved sample is then sealed and sent to production as the standard your entire run is checked against.

Each stage, where it happens and who approves it

Wrestling buyer questions

These cover this sport only. For general questions on pricing, payment, shipping and artwork formats, go to the FAQ, organized by topic.

Do your singlets meet NFHS rules?

They are made to NFHS specification, logo size and placement limits included. Rules do get revised, though, and NCAA has its own, so tell us your code at the brief stage and we will confirm the spec on the sample before production rather than after.

Can we order a two-piece wrestling uniform?

Yes. NFHS allows a compression shirt with fitted shorts in place of the singlet, as long as it is school-issued and consistent across the team. Many programs now order both styles.

Does the graphic crack when the singlet stretches?

Not when it is sublimated, since the design sits in the fiber and stretches with it. Heat-pressed graphics on four-way stretch crack at the shoulder within one season, so we do not offer them on singlets.

What is the best way to size a team that spans many weight classes?

Add a size set to your sample order. A single wrestling team covers more body shapes than any other sport we make, and a size chart on its own cannot be relied on across that spread.

Pricing for your wrestling singlets

Tell us your roster size, your deadline and any artwork you have, and a costed quote reaches you within one working day.

Describe it however you like. A garment, a sport or a short description all work.

A rough number is enough. We have no minimum and will produce a single piece.

Preferred decoration

Accepted: PDF, AI, EPS, PSD, PNG, JPG, SVG, XLSX, ZIP. Single file, maximum 256 MB.

Anything you submit is used only to quote and make your order. You keep full ownership of your artwork. Read our privacy policy.

Often ordered alongside wrestling singlets

One factory, twelve sports
Mataf Industries custom football team uniforms

Football

  • Game-day jerseys
  • Practice jerseys
  • Integrated pants
  • Compression tops
Custom Football Jerseys & Uniforms
Mataf Industries custom volleyball team uniforms

Volleyball

  • Match-day jerseys
  • Libero jerseys
  • Spandex shorts
  • Knee-length tights
Custom Volleyball Jerseys & Uniforms
Mataf Industries custom basketball team uniforms

Basketball

  • Game-day jerseys
  • Reversible practice sets
  • Game shorts
  • Shooting shirts
Custom Basketball Jerseys & Uniforms
Mataf Industries custom rugby team uniforms

Rugby

  • Match-day jerseys
  • Training tops
  • Rugby shorts
  • Team socks
Custom Rugby Jerseys
Mataf Industries custom lacrosse team uniforms

Lacrosse

  • Game-day pinnies
  • Shooter shirts
  • Game shorts
  • Kilts
Custom Lacrosse Uniforms